...
Predictive Calling - outgoing campaign without prior reservation of an operator agent to minimize call waiting time. The dialer determines how many subscribers members need to be dialed in order to receive an answer, connect with an operatoragent, and minimize reduce the waiting time for an operatoragent. Operator An agent connects to the call only at the moment when the called subscriber member answered it. In other words, for the operatoragent, an outgoing call becomes practically indistinguishable from an incoming call.
It is used to maximize the maximizes a load of operators agents by minimizing the waiting time for an operator agent to connect with a subscribermember. The dialer determines the number of operators agents working on a given project, the average speed of the operatoragent's conversation, and the amount of time required to connect with one subscriber member (including the time to try to dial subscribers members who did not answer the call). Using this information, it predicts how many telephone numbers at each particular moment of time need to start dialing in order to load the work of those operators agents who, according to the dealer's calculations, should be released in the near future.
In the case when When the dialer was able to get through to subscribers members whose number is greater more significant than the number of free operatorsagents, then the subscribers members who could not be connected to an operator agent remain waiting to wait in the queue.
From the start, the dialer makes passes every 500 ms. The In the first pass, one call is made to each operatoragent. The In the second pass, if more than one is specified in the settings and there is a line available, then it starts adding along the second line. And so on, until it fills the amount specified in the settings. Thus, based on current resources, there is a gradual and uniform filling with of calls, based on current resources.
2. Create a predictive dialer
To create a predictive call, you need to go to the "Queues" page of the " Admin " application. On this page, you can create a new queue by clicking the "Add" button button and selecting predictive dialer (Fig. 1). Clicking the "Create" button opens the General page.
To create a predictive dialer, you need to go to the Queues page of the Admin application. You can create a new queue on this page by clicking the Add button and selecting the predictive dialer (Fig. 1). Clicking the Create button opens the General page.
Fig. 1. Modal window "New queue"
Predictive The predictive dialer has the following pages (detailstab) for settingsettings:
It is necessary to complete these pages as required. See the documentation for each of these tabs for how to do this. Save your settings by clicking the Save button. Clicking the Close button will open the Queues page.
3. Add members
Open the Members page for this queue - click the 
button for the selected queue.
More details about adding or setting up members can be found here.