Settings

Owned by Olesya Tantsyura
Last updated: Nov 04, 2024
2 min read

1. Description

The page is used to configure the settings for the current User.

Fig. 1. Settings page

1.1. Change password

To change the password for the User logged into the system, enter a new password in the Password field and confirm the correctness of the entry in the Repeat password field.

The data entered into the Password field and the Repeat password field must match.

Click the Save button after entering the new password.

1.2. Language

To change the localisation of the interface, click on the Language field and select the required option from the list.

1.3. Web phone

The Use WebPhone switch is used if SIP is registered, and you want to use a SIP phone.

The Use STUN switch is responsible for using STUN. In Webitel, the server stun:stun.l.google.com:19302/ is used.

STUN (Simple Traversal of UDP through NATs) is a network protocol allowing a client behind a NAT (or multiple NATs) to find out its public address, the type of NAT it is behind, and the internet side port associated by the NAT with a particular local port. 

1.4. Call end sound

The State switch controls turning the call end sound on or off.

1.5. Change ringtone

The Use the custom ringtone checkbox allows the selection of a ringtone.
The Ringtone field becomes active when the Use the custom ringtone checkbox is marked.
In the Ringtone field, you can select the ringtone that will play during an inbound call. It can be previewed after choosing a ringtone from the list. (Fig. 2).

When the  button is clicked, and the file is played.

Fig. 2. Playback bar

It consists of the following elements:

  • Play/Pause button (Fig. 2(1));

  • File playback track (Fig. 2(2));

  • File playback volume control tool (Fig. 2(3));

  • Settings button — used to set the file playback speed (Fig. 2(4));

  • File download tool (Fig. 2(5)).

The Save button becomes active after selecting a ringtone. Clicking the Save button saves the changes made.

1.6. Ringtone volume

Using the slider, you can adjust the volume of the call. To save the changes, click the Save button.

If the call volume is set to silent in the system, the ringing sound will be set as on the computer.

The ringing sound will be adjusted according to the computer settings, if the User has not set the call volume in the system.

During a call, the volume can be changed, but these changes will only apply to the next call.