1. Description
The page is used to configure the settings for the current User.
Fig. 1. Settings page
1.1. Change password
To change the password for the User logged into the system, enter a new password in the Password field and confirm the correctness of the entry in the Repeat password field.
| Note |
|---|
The data entered into the Password field and the Repeat password field must match. |
Click the Save button after entering the new password.
1.2. Language
To change the localisation of the interface, click on the Language field and select the required option from the list.
1.3 Web phone
The Use WebPhone switch is used if SIP is registered, and you want to use a SIP phone.
The Use STUN switch is responsible for using STUN. In Webitel, the server stun:stun.l.google.com:19302/ is used.
| Info |
|---|
STUN (Simple Traversal of UDP through NATs) is a network protocol allowing a client behind a NAT (or multiple NATs) to find out its public address, the type of NAT it is behind, and the internet side port associated by the NAT with a particular local port. |
1.4 Call ending sound
The Status switch controls turning the call end sound on or off.
1.5 Change ringtone
The Use the custom ringtone checkbox allows the selection of a ringtone.
The Ringtone field becomes active when the Use the custom ringtone checkbox is marked.
In the Ringtone field, you can select the ringtone that will play during an inbound call. It can be previewed after choosing a ringtone from the list. (Fig. 2).
When the 
button is clicked, and the file is played.
Fig. 2. Playback bar
It consists of the following elements:
- Play/Pause button (Fig. 2(1));
- File playback track (Fig. 2(2));
- File playback volume control tool (Fig. 2(3));
- Settings button — used to set the file playback speed (Fig. 2(4));
- File download tool (Fig. 2(5)).
The Save button becomes active after selecting a ringtone. Clicking the Save button saves the changes made.
| Table of Contents |
|---|