The block (Fig.1(1)) is used in space to build the Flow. The settings panel for this component opens (Fig.1(2)) when you click on the block.
Fig.1. Hangup component
1.1. Hangup block
The block consists of the following elements:
The name of the component;
in branch - receiving (connecting with the previous block) branch;
out branch - outgoing (connecting with the following block) branch.
1.2. Hangup settings panel
It consists of the following elements:
Cause;
Break;
Add limit.
1.2.1. Cause
You can select the SIP code by which the call will end in this field. The call will be terminated if the field is empty, regardless of the received SIP codes.
1.2.2. Break
Responsible for the completion of the flow execution.
- initiates the end of the flow execution after the given component.
- the switch is in the off position.
1.2.3. Add limit
Unable to render {include} The included page could not be found.
Fig. 2. Setting a limit
No labels
0 Comments
You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.
0 Comments