Central block

While waiting, the block with information about this is displayed (Fig.1).

Fig. 1. Waiting

When you click the  button, the block is enlarged, and the button changes to the  button.

When you click the  button, the block is reduced, and the button changes to the button.

The central panel will change (Fig. 2) if you click the button in the left block. 

Fig. 2. Central block after clicking the call button

This is where you can manually dial a number.

You can enter a phone number from the keyboard or use the numeric keypad.

A numeric keypad is opened by clicking the button at the bottom of the panel to dial the required number for a call (Fig.3).

Fig. 3. Numeric keypad

After entering the number in the upper right corner of the block, the button is displayed, clicking which makes a call to the entered number.

Clicking the button again closes the numeric keypad.

Click the button at the top of the block to open the archive of calls. A list of calls made earlier opens (Fig.4) with information about the duration of the call, the start time of the call, and the call buttons; when clicked, a call is made to the chosen number. More about working with calls can be found here.

Fig. 4. Central block - archive

The User list opens (Fig.5) when clicking the button.

Fig. 5. Central block - list of Users

It displays the User's name, extension, and a call button. By the indicator next to the avatar, you can determine the internal status of the User:

 - the User is available;

- the User has enabled the DnD mode - other Users cannot call him;

- busy, is in conversation;

- unavailable - is not in the system, or there is no SIP connection.

When you click the button, which is located at the bottom of the block, it opens up the opportunity to dial a phone number for a call (Fig.2).

To return to the block with the call waiting display (Fig.1), click the button in the left block.