Parameters for a component
List of parameters that can be used (Table 1).
Key=Value | Description |
continue_on_fail=true | Controls what happens when the called party is unavailable (busy/offline). If true , outbound routing continues to be processed. If false - stop processing. |
instant_ringback=true | Ringback will not wait for an indication before sending a callback signal to the caller. |
ignore_early_media=true | Ignore the early media from the endpoint. |
ignore_early_media=ring_ready | Same as ignore_early_media=true , but it also sends SIP 180 to the incoming leg when the first SIP 183 is intercepted. |
hangup_after_bridge=true | Controls what happens to the calling party (A) when it is in the bridge state, and the called party (B) hangs up. If set to If set to |
ignore_display_updates=true | Do not send displayed UPDATEs to the call leg (update_display). |
call_timeout=20 | Specifies how long (in seconds) the endpoint will ring. The default is 60 seconds. |
leg_timeout=15 | It can only be used inside endpoint parameters. |
leg_delay_start=15 | Specifies the timeout in seconds before calling a branch. It can only be used inside endpoint parameters. |
origination_caller_id_number=911 | Sets the initial CallerID number. |
sip_renegotiate_codec_on_reinvite=true | Allow changing SDP codec with re-INVITE. |
Table. 1. List of options