Versions Compared
Key
- This line was added.
- This line was removed.
- Formatting was changed.
1. Description
It is designed to configure the parameters of the Queue.
It consists of the following elements (Fig. 1):
- Max wait time;
- Auto answer warning tone;
- Access to pause when there are more online agents than;
- Allow greeting agent;
- Sticky;
- Ignore calendar;
Auto answer warning toneManual distribution.
Image RemovedImage Added
Fig. 1. Parameters tab
1.1. Max wait time
Here enters This determines how long the Subscriber will wait in the Queue. After the expiration of this time, the Subscriber is removed from the Queue.
1.2. Discard abandoned after
Here enters is entered how long the Queuing mechanism will remember the position in the Subscriber's Queue at the end of the call (the Subscriber ended the call without waiting for a connection with the Agent). It is used when the Subscriber does not wait for the connection with the Agent, and if he calls again within the time entered in this field, then the position from the previous call is saved for him.
The time count starts after the Subscriber hangs up without waiting for a connection with the Agent.
1.3. Auto answer warning tone
From the drop-down list of this option, you can select the audio tone the Agent will hear after auto-answer.
If none
is selected, the Agent will not receive an audible notification.
The default tone sounds if auto-answer is enabled in the Queue, but no alert tone is selected.
Info |
---|
You can enable auto-reply by adding a variable: Key — Value — |
1.4. Max wait count
The maximum number of Subscribers waiting to be connected to the Agent enters is entered here.
If more Subscribers are waiting for a connection than entered in this field, then such Subscribers will not get into the Queue and, as a result, the call will end.
Note |
---|
If you enter 0 in this field, this function will be ignored. |
1.5. Access to pause when there are more online agents than:
What the minimum number of online Agents should be for the Agent to be able to switch to pause mode is entered here.
An Agent cannot go into pause mode if the number of Agents online is equal to or less than the number entered in this field.
1.
46. Allow greeting agent
Allows the inclusion of a personal greeting before connecting with an Agent. The greeting file is selected from the media resources in the Agent's General tab.
1.
57. Sticky
The ability to assign a specific Agent for the Subscriber.
When this switch is activated, more additional elements appear (Fig. 2):
- Sticky agent (sec)
- ;
- Ignore agent status.
Image RemovedImage Added
Fig. 2. Sticky
Sticky agent (sec) - — the time during which the Queuing mechanism waits to connect only with the Agent that is associated Agent associated with this Subscriber.
It is used if the Agent to which the Subscriber is attached is busy, or is on pause. If the Agent is offline, then the Queuing mechanism will not wait, but will connect with another Agent.
If at the end of the time the Agent that is bound to the Subscriber is not free, then the Queuing mechanism will begin to connect with other Agents.
1.6. Auto answer warning tone
From the drop-down list of this option, you can select the audio tone the Agent will hear after auto-answer.
If none
is selected, the Agent will not receive an audible notification.
If auto-answer is enabled in the Queue, but no alert tone is selected, the default
tone sounds.
Info |
---|
You can enable auto-reply by adding a variable: Key - Value - |
The Ignore agent status switch checks if the agent is in online status to determine whether to schedule a call:
Image Added — does not check the status of the Agent;
Image Added — check the Agent's status; the Agent is assigned to the call only when they are online.
When the Ignore Agent Status switch is enabled and the Agent is offline or busy, the call is assigned to that Agent but does not appear in their Workspace; instead, it waits for the time entered in the Sticky agent (sec) field.
If the Agent comes online before the time expires, the call will appear in their Workspace.
If the Agent does not come online within that time, the call will go to the Queue.
If the Agent is offline and the Ignore Agent Status switch is disabled, the Queue mechanism will not wait and will connect the call to another Agent.
1.8. Ignore calendar
If the switch is turned on, the call goes to the Queue and will remain there, but it will be distributed to the Agent only during the working hours of the Calendar. The Calendar is selected on the General tab in the Calendar field.
1.9. Manual distribution
Responsible for the manual distribution of calls in this Queue — the Agent selects which call to accept from the list of inbound calls.
If it is enabled, then calls will not be distributed automatically but will be shown to all Agents assigned to this Queue.
2. Opportunities
2.1. Change Queue settings
Goal | Change Queue settings |
---|---|
Preconditions |
|
| |
Steps |
|
| |
Result | Data saved. |
2.2. Sticky settings in the Queue
Goal | Sticky settings in the Queue |
---|---|
Preconditions |
|
Steps |
|
Result | Data saved. |
Table of Contents |
---|